TRIPLE STACK LED Tailgate Light Bar with Sequential Amber Turn Signals
TRIPLE STACK LED Tailgate Light Bar with Sequential Amber Turn Signals Flashtech Flashtech Triple Stack is the Ultimate In Tailgate Lighting! Command attention with every signal. Bombard those behind you with a volley of 1200 powerful LED's (or 780 on the 48" model). Three complete rows of lights dedicated to maximizing your pickup's presence with an attractive and unique beam of light.Exclusive "1-2-3" Sequential Turn Signals.While other tailgate turn signals are just a standard "blink", the Triple Stack gives your truck a distinctive and sporty look with "1-2-3" Sequential amber or red turn signals. The same style used by a certain American-made muscle car and only offered by Redline.Tinted Windows Making It Hard To See Behind You?Our extra bright reverse lights will help illuminate the area behind your ride when reversing. Have a backup camera? Say goodbye to grainy videos and see a much clearer picture at night!Go Ahead, Take It To The Lake.A lot of folks claim to be waterproof, but Flashtech's Triple Stack actually is. Using a rust-resistant aluminum body and an IP67 waterproof silicone, Triple Stack is protected end to end from any sand, dirt, dust, snow, or water.The best part...no drilling required!Made to be as a simple and strong as possible. Simply peel, prep, press onto your pickup and this add-on is as good as factory installed. Comes with a tough-as-nails adhesive enhancer that increases hold strength over 5x. No need to drill, its not going anywhere!Plug 'N' Play ReadyPlugs directly into your 4-way flat trailer adapter for a quick install. (Reverse light will require additional wiring, instructions provided if needed). Or use the included pigtail adapter and hardwire for a clean, custom lookProduct Specifications:LED Count: 780 LEDs on 48-inch or 1200 LEDs on 60-inch.Dimensions: 60-inch (60" x 1" x 0.5") or 48-inch (48" x 1" x 0.5").Wattage: 3w.Voltage: 12v.Amperage: 0.25 amp.Turn Signal Style: “Sequential”.Rated Lifetime: 50,000 Hours.Waterproof Rating: IP67.Material: Rust-Resistant Aluminum.LED Type: Advanced Bright LED.Feature Set: Running | Brake | "1-2-3" Sequential Turn Signals | Reverse | Sequential Hazards.Mounting: 3M Adhesive with reinforced applicator.Working Temp: -20°F to 170°F.Plug’n’Play: 4-Pin Trailer Adapter with Backup wiring.Not Compatible with: Ford's Blind Spot Information System (BLIS) with Trailer Coverage and Cross Traffic Alert. Warranty: 1 Year

TRIPLE STACK LED Tailgate Light Bar with Sequential Amber Turn Signals

Code: FT-TTGBL60
$189.00
In Stock
Add to Wishlist
  • Same Day Shipping

  • Highest Quality

  • 1 Year Warranty

Flashtech Triple Stack is the Ultimate In Tailgate Lighting! Command attention with every signal. Bombard those behind you with a volley of 1200 powerful LED's (or 780 on the 48" model). Three complete rows of lights dedicated to maximizing your pickup's presence with an attractive and unique beam of light.

Exclusive "1-2-3" Sequential Turn Signals.
While other tailgate turn signals are just a standard "blink", the Triple Stack gives your truck a distinctive and sporty look with "1-2-3" Sequential amber or red turn signals. The same style used by a certain American-made muscle car and only offered by Redline.

Tinted Windows Making It Hard To See Behind You?
Our extra bright reverse lights will help illuminate the area behind your ride when reversing. Have a backup camera? Say goodbye to grainy videos and see a much clearer picture at night!

Go Ahead, Take It To The Lake.
A lot of folks claim to be waterproof, but Flashtech's Triple Stack actually is. Using a rust-resistant aluminum body and an IP67 waterproof silicone, Triple Stack is protected end to end from any sand, dirt, dust, snow, or water.

The best part...no drilling required!
Made to be as a simple and strong as possible. Simply peel, prep, press onto your pickup and this add-on is as good as factory installed. Comes with a tough-as-nails adhesive enhancer that increases hold strength over 5x. No need to drill, its not going anywhere!

Plug 'N' Play Ready
Plugs directly into your 4-way flat trailer adapter for a quick install. (Reverse light will require additional wiring, instructions provided if needed). Or use the included pigtail adapter and hardwire for a clean, custom look

Product Specifications:
LED Count: 780 LEDs on 48-inch or 1200 LEDs on 60-inch.
Dimensions: 60-inch (60" x 1" x 0.5") or 48-inch (48" x 1" x 0.5").
Wattage: 3w.
Voltage: 12v.
Amperage: 0.25 amp.
Turn Signal Style: “Sequential”.
Rated Lifetime: 50,000 Hours.
Waterproof Rating: IP67.
Material: Rust-Resistant Aluminum.
LED Type: Advanced Bright LED.
Feature Set: Running | Brake | "1-2-3" Sequential Turn Signals | Reverse | Sequential Hazards.
Mounting: 3M Adhesive with reinforced applicator.
Working Temp: -20°F to 170°F.
Plug’n’Play: 4-Pin Trailer Adapter with Backup wiring.
Not Compatible with: Ford's Blind Spot Information System (BLIS) with Trailer Coverage and Cross Traffic Alert.
Warranty: 1 Year

Flashtech Triple Stack is the Ultimate In Tailgate Lighting! Command attention with every signal. Bombard those behind you with a volley of 1200 powerful LED's (or 780 on the 48" model). Three complete rows of lights dedicated to maximizing your pickup's presence with an attractive and unique beam of light.

Exclusive "1-2-3" Sequential Turn Signals.
While other tailgate turn signals are just a standard "blink", the Triple Stack gives your truck a distinctive and sporty look with "1-2-3" Sequential amber or red turn signals. The same style used by a certain American-made muscle car and only offered by Redline.

Tinted Windows Making It Hard To See Behind You?
Our extra bright reverse lights will help illuminate the area behind your ride when reversing. Have a backup camera? Say goodbye to grainy videos and see a much clearer picture at night!

Go Ahead, Take It To The Lake.
A lot of folks claim to be waterproof, but Flashtech's Triple Stack actually is. Using a rust-resistant aluminum body and an IP67 waterproof silicone, Triple Stack is protected end to end from any sand, dirt, dust, snow, or water.

The best part...no drilling required!
Made to be as a simple and strong as possible. Simply peel, prep, press onto your pickup and this add-on is as good as factory installed. Comes with a tough-as-nails adhesive enhancer that increases hold strength over 5x. No need to drill, its not going anywhere!

Plug 'N' Play Ready
Plugs directly into your 4-way flat trailer adapter for a quick install. (Reverse light will require additional wiring, instructions provided if needed). Or use the included pigtail adapter and hardwire for a clean, custom look

Product Specifications:
LED Count: 780 LEDs on 48-inch or 1200 LEDs on 60-inch.
Dimensions: 60-inch (60" x 1" x 0.5") or 48-inch (48" x 1" x 0.5").
Wattage: 3w.
Voltage: 12v.
Amperage: 0.25 amp.
Turn Signal Style: “Sequential”.
Rated Lifetime: 50,000 Hours.
Waterproof Rating: IP67.
Material: Rust-Resistant Aluminum.
LED Type: Advanced Bright LED.
Feature Set: Running | Brake | "1-2-3" Sequential Turn Signals | Reverse | Sequential Hazards.
Mounting: 3M Adhesive with reinforced applicator.
Working Temp: -20°F to 170°F.
Plug’n’Play: 4-Pin Trailer Adapter with Backup wiring.
Not Compatible with: Ford's Blind Spot Information System (BLIS) with Trailer Coverage and Cross Traffic Alert.
Warranty: 1 Year